How do I fit an ATI Radeon Video card into my eMachines T3104?

I just bought an ATI Radeon X1300 pro 256mb, and I probably couldn't install it even if my life depended on it. HELLLLLPPPP!!!|||is it pci or agp?



turn off pc, remove side cover. insert video card into either the pci slot or agp slot depending on which format your card is.

attach it to your case.turn your pc on and run software.|||The ATI Radeon X1300 runs on PCI or PCI Express. The PCI slot has a hook on the side (going towards the motherboard) of the slot. Once hooked and connected with power cables and such, just turn on your computer and install the driver provided in a CD.|||here's your manual:

http://emachines.com/support/product_sup…



Your machine has an empty AGP port that is ready to receive video card update.



Open the case. Remove the card plate from the back of the PC so your video card's ports will poke through. Ensure the card the seated properly.



Turn on the PC and see what happens.



Good luck!



Remember people... He said he has an X1300 PRO! Meaning AGP style of card.|||Stop Confusing him!!! ppl



You have to make sure what type of video card you have AGP or PCI Express and make sure you have a free AGP or PCI Express slot on your motherboard. If you do then do the following.



Shut Down the pc

Unplug your power cord

Open the side of your computer's case

Unscrew your monitor from the back of the video card

Unscrew and remove old video card

Insert new video card(if it's the same type) in the slot

http://lib.store.yahoo.net/lib/cooldrives/sata-pci-express-pci-card.jpg

there are the pictures of all the different slots

screw the video card in place

Connect your monitor to the video card

Plug in your computer

Start up the computer

Insert the cd with the video card drivers and install the drivers



Hope this helps